Hydraulic Breaker is a common construction machinery equipment, mainly used to break or dismantle buildings, rocks, concrete and other hard materials. It produces high frequency impact force through the high pressure liquid force provided by the hydraulic system, so as to achieve the effect of crushing.
The steps of using the hydraulic crushing hammer are as follows:
1. Preparation: Confirm that the hydraulic crushing hammer used is matched with the equipment, and ensure the normal work of the hydraulic system. Check the oil level and quality of hydraulic oil to ensure the normal operation of hydraulic system.
2. Install the hydraulic crushing hammer: Install the hydraulic crushing hammer on the equipment that needs to be removed or broken, ensure that the installation is firm, and the hydraulic pipeline is correctly connected to the hydraulic system.
3. Adjust the working parameters: according to the specific needs, adjust the working parameters of the hydraulic crushing hammer, such as impact frequency, impact force, etc. This can usually be achieved by adjusting the flow and pressure of the hydraulic system.
4. Start to work: Start the hydraulic system to make the hydraulic crushing hammer start to work. The hammer head of the crushing hammer is aimed at the area that needs to be broken, and the high pressure liquid force provided by the hydraulic system makes the hammer head produce high frequency impact force, thereby crushing or removing the hard material.
5. Pay attention to safety: When using hydraulic crushing hammer, you need to pay attention to safety matters. Ensure that the work area is free of personnel or other obstacles to avoid accidental injury. At the same time, regularly check the working status of the hydraulic system and hydraulic crushing hammer, and timely maintenance and maintenance.
The use of hydraulic crushing hammers requires professional training and operation to ensure safe and efficient work. Before use, it is recommended to read the manual of the hydraulic crushing hammer in detail, and follow the relevant operating procedures and safety regulations.
